Hydraulic selector/diverter valve, replaces Massey Ferguson plate 180908M1

Description

Aftermarket replacement Massey Ferguson hydraulic diverter valve 1860100M95
This Valve is assembled directly on lift cover
Lever position 1: External Application No 1
Neutral position: Oil supply to 3 point
Lever position 2: External application No 2
Fitting instructions:
Remove the 2 bolts securing the cap on the hydraulic lift cover
Remove cap and detach from standpipe
Ensure that the standpipe is not dislodged from its seat in the hydraulic pump
Fit the standpipe into the inlet port of Gyro valve
Fit the selector valve to the lift cover, ensuring that the standpipe is correctly located into its seat on the hydraulic pump
Secure the gyro valve to the lift cover
Operating Instructions:
The valve will operate in the following manner when one of the 3 position selected:
Lever position 1: LP1
When LP1 selected, the oil flow from the internal hydraulic pump is diverted to Port B. (Lower links (3-point) and Port A isolated)
Neutral position: NP (Vertical)
With the lever in neutral/vertical position, the tractor lower links (3-point) are operated in the normal way. (LP1 and LP2 are isolated)
Lever position 2: LP2
When LP2 selected, the oil flow from the internal hydraulic pump is diverted to Port A. (Lower links (3-point) and Port B isolated)
USE AND OPERATION:
converts MF hydraulic to external service and adds 2 ports (3/8″ BSPP).
Replaces MF top cover plate 180908M1
SPH330017
Fits to following models:
MF 1080, 1085, 130, 135, 140, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 202,
203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290,
298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 340, 342, 35, 35x, 355, 360, 362,  365, 372,375, 383, 390, 390T, 329S,
393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 560, 565, 590, 595, 65, 670, 675, 690, 698, 699, 85